Commit graph

140 commits

Author SHA1 Message Date
Thomas Kolb fd17ef3c1e Use full preamble for frequency estimation 2024-06-08 01:57:43 +02:00
Thomas Kolb 26a2558535 Add differential part to coarse frequency control 2024-06-08 01:54:42 +02:00
Thomas Kolb 2f2834026e Fix size of transmitted packets 2024-06-01 16:47:10 +02:00
Thomas Kolb de0f3620e6 Move hexdump() function to utils 2024-06-01 16:04:17 +02:00
Thomas Kolb 692780b313 setup_tundev.sh: fix shebang 2024-05-31 20:09:53 +02:00
Thomas Kolb 24bc1f8140 Fixed packet size with appended CRC 2024-05-31 18:36:16 +02:00
Thomas Kolb f6404dd0ea Move payload CRC to layer 2
Layer 1 only does decoding of the FEC, but the CRC check for data integrity is
done in layer 2 now.
2024-05-31 17:25:50 +02:00
Thomas Kolb 0e8e049e0a Replace all perror() calls with LOG() 2024-05-30 11:02:08 +02:00
Thomas Kolb 65daa182ef Use the new logging system everywhere 2024-05-30 10:49:43 +02:00
Thomas Kolb d6eaef91cd Switch to new logging system
The new system supports:

- time-tagging of log messages
- message priority levels with a threshold below which they are not printed
- colored output of the message priority for easy identification
- compile-time disabling of all logging per C module

So far, it is integrated in the main and rx modules which generate most
messages. Other modules will be migrated in the future.
2024-05-28 23:53:11 +02:00
Thomas Kolb d60788b6ad Config changes known to work with two directly connected HackRFs 2024-05-28 20:00:46 +02:00
Thomas Kolb 91facbf699 rx: reset internal state when restarting after a transmission 2024-05-28 19:55:21 +02:00
Simon Ruderich d5aeb6c0bc visualizer: make it optional to dup JSON to file 2024-05-28 08:59:06 +02:00
Simon Ruderich 570c379bc5 visualizer: always use === for comparisons 2024-05-28 08:51:56 +02:00
Simon Ruderich 21220deed7 visualizer: draw marker in history plot after selecting a packet 2024-05-28 08:51:56 +02:00
Simon Ruderich 7024964cae visualizer: use multiple plots for history 2024-05-28 08:51:56 +02:00
Simon Ruderich a2e23fceff visualizer: limit history plot to 300 packets
The drawing gets slow with too many points.
2024-05-28 08:51:56 +02:00
Simon Ruderich bc2f5ca76c visualizer: assign id to identify packets
The id is displayed in the graph, the packet information and in the
trace (on mouse over).
2024-05-28 08:51:56 +02:00
Simon Ruderich c5024a0b30 visualizer: skip redraws when they take too long 2024-05-28 08:51:56 +02:00
Simon Ruderich c63f7e8b57 visualizer: treat -1e38 as NaN
I considered updating jsonlogger.c to represent NaN as "null" in the
JSON. However, this makes the hand-written JSON generator much more
complicated.
2024-05-28 08:51:56 +02:00
Simon Ruderich 53190cd17c visualizer: don't use fixed scales
We might get (unexpected) input which is outside of the usual range.
2024-05-28 08:51:56 +02:00
Simon Ruderich 6fc4df205c Add HTML/JS visualizer with plots and graphs 2024-05-28 08:51:56 +02:00
Simon Ruderich 5fb5a2908d jsonlogger: increase pipe buffer to reduce likelihood of corrupted messages
Our JSON messages can get rather large which can cause a buffer overrun
when the reading program is not scheduled at the same time. When the
kernel returns EAGAIN we abort writing the current JSON message.
However, the unfinished (and thus invalid) JSON message is still in the
pipe and will be processed by the reading program.

Increase the pipe buffer from the default 65536 to reduce the likelihood
of this happening. It's difficult to completely prevent the issue as we
don't want to slow down the main program due to slow logging.
2024-05-28 08:51:56 +02:00
Simon Ruderich 657ac4faa3 test_rx_file: add JSON logging (controllable via JSONLOGGER define) 2024-05-28 08:51:56 +02:00
Thomas Kolb 33df7132ef rx: tag most debug messages with the sample index 2024-05-25 18:24:40 +02:00
Thomas Kolb 5f8346d290 agc: update squelch threshold more often
This fixes the noise level tracking in test cases like the loopback
test where the signal has already ramped up before the first noise level
update.
2024-05-25 18:16:24 +02:00
Thomas Kolb ca241f266b rx: add monotonic sample counter for debug messages 2024-05-25 18:15:23 +02:00
Simon Ruderich 0237ea6494 tests: fix compile 2024-05-09 18:32:51 +02:00
Simon Ruderich a4e55f781b Always NUL-terminate path in jsonlogger_init() 2024-05-09 18:32:26 +02:00
Simon Ruderich f689c4ec15 Fix compiler warnings
- implicit declaration of built-in function 'strncpy'
- control reaches end of non-void function
- assignment to 'void (*)(int,  siginfo_t *, void *)' from incompatible pointer type 'void (*)(int)'
2024-05-09 14:37:39 +02:00
Thomas Kolb a42d795002 Dump debug info from the RX via jsonlogger 2024-05-07 21:40:29 +02:00
Thomas Kolb 5bcd3a6933 jsonlogger: add test file and improve open/close behaviour 2024-05-05 18:40:50 +02:00
Thomas Kolb 251aca7738 Basic implementation of a JSON logger module 2024-05-05 18:09:00 +02:00
Thomas Kolb 033c26bcae preamble: invert symbols to match BPSK convention 2024-04-27 22:42:32 +02:00
Thomas Kolb c6ea578808 sdr: fix loss of samples due to unaligned buffer reads
sdr_rf_to_baseband() processes samples in blocks of size SDR_OVERSAMPLING. If
the total number of samples does not align with this block size, the leftover
samples are lost and phase and timing glitches result.

To mitigate this, sdr_receive() now has an additional parameter that specifies
the alignment of the returned data. The number of samples returned is always a
multiple of this alignment factor. This feature is used to ensure that the
number of returned samples is a multiple of SDR_OVERSAMPLING and therefore no
samples are lost in sdr_rf_to_baseband().

sdr_rf_to_baseband() now has an additional check that makes the function fail
if the alignment is incorrect.
2024-04-27 20:08:04 +02:00
Simon Ruderich a3928d0ad0 Fix compiler warnings
- passing argument 2 of 'crc_generate_key' discards ‘const’ qualifier;
  a bit ugly but signature of crc_generate_key() is wrong
- variable 'linearized_history' set but not used
- typedef is unused
- superfluous arguments to DEBUG_LOG() and fprintf()
- implicit declaration of function 'memset'
- unused arguments
2024-04-27 12:22:33 +02:00
Simon Ruderich b3ceb50b23 Fix one-byte buffer-overflow in layer1_rx_process() 2024-04-27 12:17:58 +02:00
Thomas Kolb c250944d79 transmission: fix ramp-down length calculation 2024-04-26 22:40:41 +02:00
Thomas Kolb e22b9ed4c5 rx: fix squelch level tracking
Thanks to rudi_s for reporting this.
2024-04-26 21:50:07 +02:00
Thomas Kolb d3b0ac1e0a rx: signal busy as long as squelch is open 2024-04-26 21:47:41 +02:00
Thomas Kolb 90ed7dc0a8 Re-add accidentally removed constants 2024-04-20 01:31:21 +02:00
Simon Ruderich 2768e21849 test_rx_file: set nco frequency 2024-04-20 01:14:17 +02:00
Simon Ruderich 79fc1c4f59 utils: fix numpy deprecation warnings 2024-04-20 01:14:17 +02:00
Thomas Kolb 7d1a927425 Calculate HackRF center frequency correctly 2024-04-20 01:07:21 +02:00
Thomas Kolb 32632914df Prevent TX exception in QPSK mode
QPSK-modulated packets require more samples, which must be available in the TX
buffer. Therefore we increase the required free space.
2024-04-20 01:04:13 +02:00
Thomas Kolb 11f19c03a0 Fix TX handling for multiple packets
- (only) time-based end-of-transmission tracking
  - removed tx_done flag
  - count zero-buffers correctly in time-tracking
  - add 10 ms of headroom so the transmission does not stop before buffer was
    completely transmitted (race condition)
  - fix race condition with tx_start_time in sdr_start_tx()
- simplified packet queuing (no chunking)
- read multiple packets before starting transmission (to fill buffers initially)

Thanks to rudi_s!
2024-04-20 00:55:39 +02:00
Thomas Kolb 1f5f922cdf Adjust squelch level and rampup 2024-04-12 21:50:49 +02:00
Thomas Kolb 91db4e1f75 rx: implement squelch + symsync reset
Whenever the squelch opens, the symsync is reset to prevent lock-up in
that module due to noise.
2024-04-08 22:03:09 +02:00
Thomas Kolb 4b46d87edb Add missing variable declaration 2024-03-31 22:26:34 +02:00
Thomas Kolb 93fd8aebbc Lock TX to RX frequency for clients
Central nodes (“base stations”) do no longer do coarse frequency estimation,
but do only use the preamble + PLL for fine offset tracking.
2024-03-31 22:23:04 +02:00