Commit graph

179 commits

Author SHA1 Message Date
Thomas Kolb 934b18e382 Integrate TUN device interface
Packets are now read from the TUN device and transmitted. The signal
goes through a channel emulator and is then received + decoded. If
decoding is successful, the result is written back to the TUN device
(which does not make much sense, but works for testing).

Unfortunately, there still seems to be a problem in the receiver: packet
loss is very high even at extremely high SNRs.
2022-02-27 20:21:14 +01:00
Thomas Kolb 890baf577f Moved config.h to src/ top level 2022-02-27 18:41:16 +01:00
Thomas Kolb 8a8ddc5ea3 rx: integrate AGC 2022-02-27 16:59:14 +01:00
Thomas Kolb a60b8b1f87 Moved results.h to src/ top level 2022-02-27 16:02:51 +01:00
Thomas Kolb 1787d0d351 layer1: implement per-packet modulation/coding
This allows a higher layer to adjust data rate based on the current
channel conditions. For example, the SNR could be measured and if it
becomes too low for the current modulation/code, a lower-order
modulation or stronger code could be used.
2022-02-17 21:39:18 +01:00
Thomas Kolb 0ed7109335 Clean up debug output 2022-02-16 21:46:56 +01:00
Thomas Kolb 876bafd6f9 Moved receiver to separate module 2022-02-16 20:52:46 +01:00
Thomas Kolb a5634ed736 Move the transmission chain to a separate "tx" module 2022-02-13 21:29:35 +01:00
Thomas Kolb 97772fa12b Removed unused packet_demod 2022-02-13 20:06:14 +01:00
Thomas Kolb 513a399ae4 Refactoring: moved layer1-related stuff to subdirectory 2022-02-13 20:05:47 +01:00
Thomas Kolb eb3fc5f9c7 Use data whitening 2022-02-12 22:06:49 +01:00
Thomas Kolb 87b844a2da Implement CRC check and phase tracking 2022-02-12 21:58:53 +01:00
Thomas Kolb 947615f5cd First complete RX chain
Decoding of the test message works down to ~10 dB SNR.

Still missing:
- Phase tracking during header and payload.
- CRC calculation and check.
- Data whitening.
2022-02-11 17:56:26 +01:00
Thomas Kolb 042c05f9f3 Decode the received header 2022-02-10 22:33:51 +01:00
Thomas Kolb f2c95a125d Use new frequency+phase estimation method for preamble 2022-02-06 18:04:31 +01:00
Thomas Kolb 8060137c1d Move frequency estimation to separate module 2022-02-05 20:33:56 +01:00
Thomas Kolb 465d9a1c26 main: restructure state management; evaluate a found preamble 2022-02-03 22:18:24 +01:00
Thomas Kolb 423f1d6416 correlator: added functions for phase and frequency estimation 2022-02-03 22:17:37 +01:00
Thomas Kolb c17c7e060f Integrate preamble search 2022-02-01 21:35:43 +01:00
Thomas Kolb b6713909f7 Make initial frequency sync much faster
The NCO frequency is now only adjusted every 8 symbols. That means that
the frequency error over the last 8 symbols before the adjustment is
(almost) constant, giving a good estimation result. Therefore, the
adjustment factor can be much larger than previously, leading to faster
acquisition time.
2022-01-30 20:23:41 +01:00
Thomas Kolb c1dd039d6b First shot at frequency synchronization
Supports only the BPSK part so far (ramp-up, preamble).
2022-01-30 20:05:20 +01:00
Thomas Kolb 09465591ed Added symsync to the receiver chain 2022-01-29 22:37:55 +01:00
Thomas Kolb f983635c14 Fixed output size of transmission_filter_packet() 2022-01-29 22:14:25 +01:00
Thomas Kolb d522a1d6bd Implemented pulse shaping
The pulse shaper currently uses an RRC filter with beta=0.2.
2022-01-29 22:05:17 +01:00
Thomas Kolb a1f62a3b0a packet_mod: implement FEC and modulation for the header 2022-01-23 16:28:53 +01:00
Thomas Kolb 9a1107ff38 Added correlator + small test program 2022-01-22 22:42:05 +01:00
Thomas Kolb 6c21618f1f Document the packet_mod interface 2021-10-17 22:51:10 +02:00
Thomas Kolb 874d8d5073 Fixed the modulator + test demodulation 2021-10-17 19:45:54 +02:00
Thomas Kolb 9ba470adeb Initial implementation of packet modulation
Not really tested yet…
2021-10-17 19:26:38 +02:00