251 commits

This branch

This branch

All branches

Author	SHA1	Message	Date
Thomas Kolb	774f5c0420	l2udptest_client: fix compilation	2024-12-12 19:44:07 +01:00
Thomas Kolb	f51b1da9d5	connection: calculate IPv6 address for peer	2024-12-12 19:44:07 +01:00
Thomas Kolb	339dc5490c	Add missing call to digipeater_end_interval()	2024-12-12 19:44:07 +01:00
Thomas Kolb	f3b6ab1a29	digipeater: add one-shot packet queue and interval handling ... The oneshot queue is for connection management frames that are only sent once, at the beginning of the next burst. An example is the Connection Reset packet. Intervals define the boundary between the handling of different connections. The interval can be either ended by a packet with TX Request set, or by a timeout. In either case, forwarding of packets to the current connection stops and the connection is re-scheduled to a later point in time.	2024-12-12 19:44:07 +01:00
Thomas Kolb	01edbb1db1	WIP: managing multiple connections ... Working towards handling multiple connections. A lot is still missing.	2024-12-12 19:44:07 +01:00
Thomas Kolb	6e303e8aed	WIP: digipeater module managing multiple connections ... Backup commit. This is a basic setup with lots of TODOs and errors. Will not compile yet.	2024-12-12 19:44:07 +01:00
Thomas Kolb	8572018c4e	l2/connection: refactoring ... - split handle_packet() in two functions: the first does basic checks and calls the second one. This allows to do the basic checks externally (in the multi-connection management module) without duplicating them. - use the new layer2_encode_packet() function.	2024-12-12 19:44:07 +01:00
Thomas Kolb	16f7ae5242	l2/packet_structs: add function to encode a complete packet	2024-12-12 19:44:07 +01:00
Thomas Kolb	97a23701d0	Handle retransmits inside the connection module	2024-12-12 19:44:07 +01:00
Thomas Kolb	ec3244a61f	Add a module to manage a list of connections	2024-12-12 19:44:07 +01:00
Thomas Kolb	a0623668a7	Do all time calculations in uint64_t ... This prevents loss of precision that occurs with double-precision floats if timestamps become very large. Timestamps are already large if they contain a UNIX time value (requires 60 bits; double has 53 bit resolution).	2024-12-12 19:44:07 +01:00
Thomas Kolb	ec9e893c73	l2udptest: replace by two programs: client and digipeater ... Both are identical so far, this is just an infrastructure commit.	2024-12-12 19:44:07 +01:00
Thomas Kolb	227837623c	Remove empty packet from queue after burst was transmitted	2024-12-12 19:44:07 +01:00
Thomas Kolb	02a2afbc5b	connection: do not send ACKs for empty packets	2024-12-12 19:44:07 +01:00
Thomas Kolb	307fdc657d	connection: handle ACKs from empty packets correctly	2024-12-12 19:44:07 +01:00
Thomas Kolb	547a39508b	Handle received packets	2024-12-12 19:44:07 +01:00
Thomas Kolb	be607acbc2	connection: use correct addresses for empty packets	2024-12-12 19:44:07 +01:00
Thomas Kolb	729d61feb7	l2udp: Use the new layer2 connection module	2024-12-12 19:44:07 +01:00
Thomas Kolb	3189aac2ab	Pass received packets to layer 2 processing	2024-12-12 19:44:07 +01:00
Thomas Kolb	3c7caeda1b	Basic infrastructure for layer2-over-udp test	2024-12-12 19:44:07 +01:00
Thomas Kolb	778ac7f815	doc: document connectionless frame type	2024-10-25 20:36:34 +02:00
Thomas Kolb	5848d78272	doc: document data frames	2024-10-25 20:12:01 +02:00
Thomas Kolb	0b48995cec	workflows: use latest version of asciidoctor container	2024-10-24 21:20:12 +02:00
Thomas Kolb	0309c042e4	doc: describe connection reset and disconnect packets	2024-10-24 21:14:30 +02:00
Thomas Kolb	159c3f1518	ci/docker: add graphviz to documentation build container	2024-09-22 14:31:33 +02:00
Thomas Kolb	1ae421e876	doc: add state diagrams	2024-09-21 00:55:25 +02:00
Thomas Kolb	a455fac050	connection.h: fix comment	2024-09-20 23:38:54 +02:00
Thomas Kolb	44921bd65d	Decrease the AGC bandwidth during signal acquisition ... This prevents rapid squelch activation/deactivation if only noise is present. The AGC bandwidth was tuned such that it still allows preambles to be detected reliably.	2024-09-20 23:10:49 +02:00
Thomas Kolb	ccd9af6664	Delay squelch activation by 2 ms ... Delaying the squelch activation by 2 ms helps to avoid dropped samples if the signal is barely above the squelch threshold.	2024-09-20 23:08:43 +02:00
Thomas Kolb	4dc2c60c8b	rx: reduce squelch threshold from 10 to 6 dB ... During tests it was determined that this is much more reliable. The theory is that the first packet of a burst was frequently not detected because the squelch opened too late if the channel was very noisy. Unfortunately, the squelch now opens very often even if no signal is present. This will be improved in the future.	2024-09-12 23:52:33 +02:00
Thomas Kolb	706a1eb437	freq_est: make ramp-up delta phase check more strict ... This should help with occasional jumps in the estimated carrier frequency on receivers running frequency tracking.	2024-09-12 23:49:57 +02:00
Thomas Kolb	eb802629a1	layer1/rx: calculate EVM during header and data reception	2024-09-07 00:48:11 +02:00
Thomas Kolb	c61a7a7cf7	doc: start documenting the Layer 2 packets (WIP)	2024-08-30 23:46:47 +02:00
Simon Ruderich	3f4a50bdce	doc: don't use external resources ... Embedding (only) parts of MathJax is a bit ugly ...	2024-08-28 13:42:33 +02:00
Thomas Kolb	b46b2536e1	Add a CI workflow compiling the hamnet70 program	2024-08-27 22:01:51 +02:00
Thomas Kolb	1bcc8c2fea	Add Dockerfile with hamnet70 build dependencies	2024-08-27 22:01:51 +02:00
Thomas Kolb	c342cf656e	Move documentation docker scripts to /ci/docker	2024-08-27 21:28:09 +02:00
Thomas Kolb	03829e058b	Run deployment only on main branch	2024-08-27 21:23:40 +02:00
Thomas Kolb	f686635837	doc: automatic builds and deployment using Forgejo Actions ... Actions run in a custom Docker image built by the scripts in `doc/docker`. There are two jobs that run in sequence: - `build-doc`: builds the documentation from the AsciiDoc sources. - `deploy-doc`: Uploads the generated files to http://0fm.de	2024-08-27 21:10:30 +02:00
Thomas Kolb	10f634d144	doc: translate message sequence diagrams to mscgen ... Mermaid is more beautiful, but the tool stack is really annoying. A Chrome browser should not be necessary to generate some SVGs.	2024-08-27 18:07:12 +02:00
Thomas Kolb	79c340c20d	connection: add state checks	2024-08-25 23:27:22 +02:00
Thomas Kolb	fc9e5c5229	Combine layer2_rx and layer2_tx in a new connection module ... The new module is not used yet, but this is a preparation for the future multi-client networking support.	2024-08-25 22:26:56 +02:00
Thomas Kolb	899152a530	Remove config.h from Git; must be adapted by the user ... A template for the config file is provided in src/config.h.template. It must be copied to src/config.h and adapted for force users to set their own station call sign.	2024-08-25 20:26:41 +02:00
Thomas Kolb	303bfaec4f	doc: enable stem processing for formulas	2024-08-25 01:14:38 +02:00
Thomas Kolb	76f9f37b5d	doc/Makefile: add clean target	2024-08-25 01:14:28 +02:00
Thomas Kolb	9d86bc3c97	doc: write generated files to separate directory	2024-08-25 00:52:51 +02:00
Thomas Kolb	c52d0766d7	Remove obsolete compile_flags.txt	2024-08-23 19:52:24 +02:00
Thomas Kolb	2e91fd7c42	Apply free software+documentation licenses ... All code is now licensed under GPLv3+. The documentation is licensed under CC BY-SA 4.0. This is now officially free software! \o/	2024-08-23 11:53:40 +02:00
Thomas Kolb	017eb221f1	Integrate the interleaver	2024-08-16 22:14:07 +02:00
Thomas Kolb	325abdbd02	packet_queue: allow max. 15 packets to be queue (transmit window) ... 16 is not allowed because it leads to an overflow in sequence numbers, making them ambiguous.	2024-08-09 22:22:01 +02:00