LNSC-2420-Firmware/src/led_chplex.c

#include <libopencm3/stm32/gpio.h>

#include "pinout.h"

#include "led_chplex.h"

#define NUM_LEDs 6

static uint8_t led_index;
static uint8_t led_mask;


void led_chplex_init(void)
{
	// set up required GPIOs
	gpio_clear(LED_PORT, LED_ALL_PINS);
	gpio_mode_setup(LED_PORT, GPIO_MODE_INPUT, GPIO_PUPD_NONE, LED_ALL_PINS);

	// initialize charlieplex stepping
	led_index = 0;

	// all LEDs off by default
	led_mask = 0;
}


void led_chplex_periodic(void)
{
	// set all GPIOs to input to ensure the LEDs are properly switched off
	gpio_mode_setup(LED_PORT, GPIO_MODE_INPUT, GPIO_PUPD_NONE, LED_ALL_PINS);

	// apply the proper signals depending on LED index
	if(led_mask & (1 << led_index)) {
		switch(led_index)
		{
			case LED_CHPLEX_IDX_SOLAR_ON:
				gpio_set(LED_PORT, LED_A_PIN);
				gpio_clear(LED_PORT, LED_B_PIN);
				gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_A_PIN | LED_B_PIN);
				break;

			case LED_CHPLEX_IDX_LOAD_ON:
				gpio_set(LED_PORT, LED_B_PIN);
				gpio_clear(LED_PORT, LED_C_PIN);
				gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_B_PIN | LED_C_PIN);
				break;

			case LED_CHPLEX_IDX_ERR_TEMP:
				gpio_set(LED_PORT, LED_B_PIN);
				gpio_clear(LED_PORT, LED_A_PIN);
				gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_A_PIN | LED_B_PIN);
				break;

			case LED_CHPLEX_IDX_ERR_LOAD:
				gpio_set(LED_PORT, LED_C_PIN);
				gpio_clear(LED_PORT, LED_B_PIN);
				gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_B_PIN | LED_C_PIN);
				break;

			case LED_CHPLEX_IDX_CHARGE_PULSE:
				gpio_set(LED_PORT, LED_A_PIN);
				gpio_clear(LED_PORT, LED_C_PIN);
				gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_A_PIN | LED_C_PIN);
				break;

			case LED_CHPLEX_IDX_DISCHARGE_PULSE:
				gpio_set(LED_PORT, LED_C_PIN);
				gpio_clear(LED_PORT, LED_A_PIN);
				gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_A_PIN | LED_C_PIN);
				break;

			default:
				// unknown index => do nothing and reset index
				led_index = 0;
				break;
		}
	}

	led_index++;
	if(led_index >= NUM_LEDs) {
		led_index = 0;
	}
}


void led_chplex_on(uint8_t idx)
{
	led_mask |= (1 << idx);
}


void led_chplex_off(uint8_t idx)
{
	led_mask &= ~(1 << idx);
}


void led_chplex_toggle(uint8_t idx)
{
	led_mask ^= (1 << idx);
}


void led_chplex_mask(uint8_t mask)
{
	led_mask = mask;
}



void led_chplex_deepsleep_prepare(void)
{
	// set all GPIOs to input to ensure the LEDs are properly switched off
	gpio_mode_setup(LED_PORT, GPIO_MODE_INPUT, GPIO_PUPD_NONE, LED_ALL_PINS);
}


void led_chplex_deepsleep_resume(void)
{
	// nothing to do here
}